Commit graph

440 commits

Author SHA1 Message Date
6543
8ef169a173
Document REACTION_MAX_USER_NUM setting option (#27954)
4a0103fa29/modules/setting/ui.go (L24)

4a0103fa29/modules/setting/ui.go (L77)

---
*Sponsored by Kithara Software GmbH*
2023-11-08 01:50:31 +01:00
MiloCubed
2f2ca8c940
[docs] Add note that PROTOCOL config is case-sensitive (#25685)
See [issue on
gitea.com](https://gitea.com/gitea/gitea-docusaurus/issues/38), copied
below for convenience:
> Hello, may I first confirm that the app.ini PROTOCOL config is case
sensitive (must be lowercase)?
> 
> If so, I'd like to suggest for it to be highlighted in the [HTTPS
Setup](https://docs.gitea.com/administration/https-setup#using-the-built-in-server)
page.
> Perhaps something like:
> For the PROTOCOL=https field, make sure https is lowercase. Writing
PROTOCOL=HTTPS may result in a SSL_ERROR_RX_RECORD_TOO_LONG error on
Firefox or ERR_SSL_PROTOCOL_ERROR on Chrome and Edge.
> 
> Background
> At first I carelessly wrote PROTOCOL=HTTPS in my app.ini, and Firefox
didn't allow me to connect because:
> Secure Connection Failed
> An error occurred during a connection to gitea.local.lan. SSL received
a record that exceeded the maximum permissible length.
> Error code: SSL_ERROR_RX_RECORD_TOO_LONG
> I spent maybe half an hour troubleshooting my certs, ports, and other
configs before backtracking to the start and realizing the
capitalization difference there 😅. When I changed that config to
lowercase, it worked.

For this PR I added the note in the Config Cheat Sheet page and fixed
the links to it from the HTTPS Setup page.

Was originally thinking to put the note in the HTTPS Setup page itself,
but since there are 2 sections referencing the PROTOCOL config, I was
thinking it'd be neater and more concise to put it in the Config Cheat
Sheet page instead. Especially since both sections already link to it,
and I actually tried to check that link quite early on in my
troubleshooting (but didn't pay much attention to it since the link was
broken).

## Before/After screenshots as per [this repo's
docs](https://github.com/go-gitea/gitea/tree/main/docs)

Before - links

![image](https://github.com/go-gitea/gitea/assets/135522693/e0745077-f6a9-4178-aa78-2155ccb58fd6)
Note: For this the links weren't broken, the links fix is because they
were broken on gitea.com's docs (see below).

After - links

![image](https://github.com/go-gitea/gitea/assets/135522693/748b3759-aa13-4ad0-9811-c6664b6cdd35)

Before - config cheat sheet

![image](https://github.com/go-gitea/gitea/assets/135522693/4ff2e4e6-3528-4cea-a7a6-64a75854eb99)

After - config cheat sheet

![image](https://github.com/go-gitea/gitea/assets/135522693/c8e07ab6-5a26-4582-a4d0-b83d1f11a30e)


## Before/After screenshots as per [gitea.com's
docs](https://gitea.com/gitea/gitea-docusaurus)

Before - links

![image](https://github.com/go-gitea/gitea/assets/135522693/4d26ea67-b987-4b91-810b-c53852a13078)

After - links

![image](https://github.com/go-gitea/gitea/assets/135522693/24d02907-7f9e-4228-a190-7696623c00f7)

Before - config cheat sheet

![image](https://github.com/go-gitea/gitea/assets/135522693/978eedfd-ce05-488d-ab54-9d7f3c9f233d)

After - config cheat sheet

![image](https://github.com/go-gitea/gitea/assets/135522693/12d22566-a2b0-45ec-8302-a88eae9365d8)
2023-10-19 16:14:46 +08:00
Lunny Xiao
7ff1f2527c
Make actions default enabled for newly created repository if global configuraion enabled (#27482) 2023-10-10 14:45:31 +00:00
Jason Song
2c7b6c378e
Increase queue length (#27555) 2023-10-10 18:47:49 +08:00
M Hickford
a825cc0f34
Pre-register OAuth application for tea (#27509)
It remains to implement OAuth login in tea
https://gitea.com/gitea/tea/issues/598

Fixes #27510
2023-10-08 03:51:08 +00:00
silverwind
023e937141
Rename the default themes to gitea-light, gitea-dark, gitea-auto (#27419)
Part of https://github.com/go-gitea/gitea/issues/27097:

- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`

I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.

## ⚠️ BREAKING ⚠️

1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-10-06 09:46:36 +02:00
Francesco Antognazza
bc21723717
Make Actions tasks/jobs timeouts configurable by the user (#27400)
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```

---

Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.

Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
2023-10-02 23:09:26 +02:00
Lunny Xiao
e5ec57cd60
Actions are no longer experimental, so enable them by default (#27054)
This PR makes the actions enabled by default, so people will find it
easier to enable actions in repository setting.
2023-09-15 06:43:39 +00:00
wxiaoguang
998cea5888
Use secure cookie for HTTPS sites (#26999)
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.

And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.

![image](https://github.com/go-gitea/gitea/assets/2114189/7bc9a859-dcc1-467d-bc7c-1dd6a10389e3)
2023-09-11 17:03:51 +08:00
Lunny Xiao
e97e883ad5
Add reverseproxy auth for API back with default disabled (#26703)
This feature was removed by #22219 to avoid possible CSRF attack.

This PR takes reverseproxy auth for API back but with default disabled.

To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.

For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-09-07 08:31:46 +00:00
FuXiaoHei
460a2b0edf
Artifacts retention and auto clean up (#26131)
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:

- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
2023-09-06 07:41:06 +00:00
CaiCandong
7477c93d62
Update docs about attachment path (#26883)
This change was caused by #26271, for configuration as below:
```
[attachment]
ENABLE = true
PATH = data/attachments
MAX_SIZE = 100
MAX_FILES = 5
```
Before #26271, the resolved path is ${AppWorkPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/attachments`)
After #26271, the resolved path is ${AppDataPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/data/attachments`)


Fix  https://github.com/go-gitea/gitea/issues/26864
Follow https://github.com/go-gitea/gitea/pull/26271
2023-09-03 11:40:10 +02:00
mainboarder
c533991519
Expanded minimum RSA Keylength to 3072 (#26604)
German Federal Office for Information Security requests in its technical
guideline BSI TR-02102-1 RSA Keylength not shorter than 3000bits
starting 2024, in the year 2023 3000bits as a recommendation. Gitea
should request longer RSA Keys by default in favor of security and drop
old clients which do not support longer keys.


https://www.bsi.bund.de/SharedDocs/Downloads/DE/BSI/Publikationen/TechnischeRichtlinien/TR02102/BSI-TR-02102.pdf?__blob=publicationFile&v=9
- Page 19, Table 1.2

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-28 00:53:16 +00:00
techknowlogick
b3f7137174
Update minimum password length requirements (#25946) 2023-08-21 19:27:50 +00:00
techknowlogick
b85a57845c
update config docs url (#26640) 2023-08-21 17:14:49 +00:00
Denys Konovalov
63ab92d797
Pre-register OAuth2 applications for git credential helpers (#26291)
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.

Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.


![grafik](https://github.com/go-gitea/gitea/assets/47871822/81a78b1c-4b68-40a7-9e99-c272ebb8f62e)

The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.

Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>

---------

Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-08-09 14:24:07 +02:00
Panagiotis "Ivory" Vasilopoulos
d58c542579
Add 'Show on a map' button to Location in profile, fix layout (#26214)
Not too important, but I think that it'd be a pretty neat touch.

Also fixes some layout bugs introduced by a previous PR.

---------

Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-07-31 08:44:45 +00:00
wxiaoguang
8baa42c8d7
Calculate MAX_WORKERS default value by CPU number (#26177)
To avoid consuming user's 100% CPU, limit the default value of
MAX_WORKERS

Fix #26063 (the CPU 100% problem mentioned in it)
2023-07-27 16:40:35 +08:00
wxiaoguang
d0dbe52e76
Refactor to use urfave/cli/v2 (#25959)
Replace #10912

And there are many new tests to cover the CLI behavior

There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.

----

## ⚠️ BREAKING ⚠️

This PR does it best to avoid breaking anything. The major changes are:

* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
    * Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
    * After: only `./gitea subcmd --sub-opt` could be used
    * The global options like `--config` are not affected
2023-07-21 17:28:19 +08:00
wxiaoguang
50e14699d3
Update path related documents (#25417)
Update WorkPath/WORK_PATH related documents, remove out-dated
information.

Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.


![image](https://github.com/go-gitea/gitea/assets/2114189/8095afa4-da76-436b-9e89-2a92c229c01d)

Co-authored-by: Giteabot <teabot@gitea.io>
2023-07-19 11:22:57 +02:00
wxiaoguang
faa28b5a44
Move public asset files to the proper directory (#25907)
Move `public/*` to `public/assets/*`

Some old PRs (like #15219) introduced inconsistent directory system.

For example: why the local directory "public" is accessed by
`http://site/assets`? How to serve the ".well-known" files properly in
the public directory?

For convention rules, the "public" directory is widely used for the
website's root directory. It shouldn't be an exception for Gitea.

So, this PR makes the things consistent:

* `http://site/assets/foo` means `{CustomPath}/public/assets/foo`.
* `{CustomPath}/public/.well-known` and `{CustomPath}/public/robots.txt`
can be used in the future.

This PR is also a prerequisite for a clear solution for:
* #21942
* #25892 
* discourse.gitea.io: [.well-known path serving custom files behind
proxy?](https://discourse.gitea.io/t/well-known-path-serving-custom-files-behind-proxy/5445/1)

This PR is breaking for users who have custom "public" files (CSS/JS).
After getting approvals, I will update the documents.

----

## ⚠️ BREAKING ⚠️

If you have files in your "custom/public/" folder, please move them to
"custom/public/assets/".

---------

Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-07-18 18:06:43 +02:00
wxiaoguang
cea9401634
Following-up improvments for various PRs (#25620)
For:

* #22743
* #25408
* #25412
* #25588
2023-07-01 14:00:10 -04:00
Jason Song
67bd9d4f1e
Restrict [actions].DEFAULT_ACTIONS_URL to only github or self (#25581)
Resolve #24789

## ⚠️ BREAKING ⚠️

Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.

But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.

If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.

Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.

Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.

Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.

Follow-up on the runner side:

- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
2023-06-30 07:26:36 +00:00
Lunny Xiao
9c62ca5689
Fix default value for LocalURL (#25426)
Fix #23769
2023-06-24 11:56:29 +08:00
Jason Song
375fd15fbf
Refactor indexer (#25174)
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.

Current supported engines and the index versions:

| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |


## Changes

### Split

Splited it into mutiple packages

```text
indexer
├── internal
│   ├── bleve
│   ├── db
│   ├── elasticsearch
│   └── meilisearch
├── code
│   ├── bleve
│   ├── elasticsearch
│   └── internal
└── issues
    ├── bleve
    ├── db
    ├── elasticsearch
    ├── internal
    └── meilisearch
```

- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.

### Deduplication

- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.


### Enhancement

- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-06-23 12:37:56 +00:00
wxiaoguang
ce46834b93
Remove "CHARSET" config option for MySQL, always use "utf8mb4" (#25413)
In modern days, there is no reason to make users set "charset" anymore.

Close #25378

## ⚠️ BREAKING

The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
2023-06-21 10:49:25 +00:00
Lunny Xiao
e79ff50560
Use the new download domain replace the old (#25405)
As title.
2023-06-21 03:11:17 +00:00
Lunny Xiao
d6dd6d641b
Fix all possible setting error related storages and added some tests (#23911)
Follow up #22405

Fix #20703 

This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.

- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.

---------

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2023-06-14 11:42:38 +08:00
silverwind
50bd7d0b24
Remove the service worker (#25010)
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.

## ⚠️ BREAKING

You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
2023-05-31 02:07:04 +00:00
JakobDev
1b115296d3
Followup to pinned Issues (#24945)
This addressees some things from #24406 that came up after the PR was
merged. Mostly from @delvh.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
2023-05-30 15:26:51 +00:00
silverwind
c7612d178c
Remove meta tags theme-color and default-theme (#24960)
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.

## ⚠️ BREAKING ⚠️

1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.

2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
2023-05-28 22:33:17 +00:00
wxiaoguang
2f149c5c9d
Use [git.config] for reflog cleaning up (#24958)
Follow
https://github.com/go-gitea/gitea/pull/24860#discussion_r1200589651

Use `[git.config]` for reflog cleaning up, the new options are more
flexible.

*
https://git-scm.com/docs/git-config#Documentation/git-config.txt-corelogAllRefUpdates
*
https://git-scm.com/docs/git-config#Documentation/git-config.txt-gcreflogExpire

## ⚠️ BREAKING

The section `[git.reflog]` is now obsolete and its keys have been moved
to the following replacements:
- `[git.reflog].ENABLED` → `[git.config].core.logAllRefUpdates`
- `[git.reflog].EXPIRATION` → `[git.config].gc.reflogExpire`
2023-05-28 01:07:14 +00:00
JakobDev
aaa1094663
Add the ability to pin Issues (#24406)
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.

## Screenshots

![grafik](https://user-images.githubusercontent.com/15185051/235123207-0aa39869-bb48-45c3-abe2-ba1e836046ec.png)

![grafik](https://user-images.githubusercontent.com/15185051/235123297-152a16ea-a857-451d-9a42-61f2cd54dd75.png)

![grafik](https://user-images.githubusercontent.com/15185051/235640782-cbfe25ec-6254-479a-a3de-133e585d7a2d.png)

The Design was mostly copied from the Projects Board.

## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.

## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration

**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-25 15:17:19 +02:00
techknowlogick
033d92997f
Allow skipping forks and mirrors from being indexed (#23187)
This PR adds two new options to disable repo/code search indexing of
both forks and mirrors.

Related: #22842
2023-05-25 16:13:47 +08:00
wxiaoguang
5f39285d6d
Improve RunMode / dev mode (#24886)
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
2023-05-25 03:47:30 +00:00
wxiaoguang
8080ace6fc
Support changing git config through app.ini, use diff.algorithm=histogram by default (#24860)
Close #13454 , Close #23255, Close #14697 (and maybe more related
issues)

Many users have the requirement to customize the git config. This PR
introduces an easy way: put the options in Gitea's app.ini
`[git.config]`, then the config options will be applied to git config.

And it can support more flexible default config values, eg: now
`diff.algorithm=histogram` by default. According to:
https://stackoverflow.com/a/32367597/4754037 , `histogram diff` is
efficient and doesn't like to cause server-side problems.

---------

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-23 16:30:19 +00:00
KN4CK3R
cdb088cec2
Add CRAN package registry (#22331)
This PR adds a [CRAN](https://cran.r-project.org/) package registry.

![grafik](https://user-images.githubusercontent.com/1666336/210450039-d6fa6f77-20cd-4741-89a8-1624def267f7.png)
2023-05-22 10:57:49 +08:00
wxiaoguang
2cb66fff60
Support wildcard in email domain allow/block list (#24831)
Replace #20257 (which is stale and incomplete)

Close #20255

Major changes:

* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
2023-05-22 00:05:44 +00:00
wxiaoguang
4647660776
Rewrite logger system (#24726)
## ⚠️ Breaking

The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.

Although many legacy options still work, it's encouraged to upgrade to
the new options.

The SMTP logger is deleted because SMTP is not suitable to collect logs.

If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.

## Description

Close #12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)

Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)

There is a new document (with examples): `logging-config.en-us.md`

This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.

## The old problems

The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.


## The new design

See `logger.go` for documents.


## Screenshot

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/4462d713-ba39-41f5-bb08-de912e67e1ff)


![image](https://github.com/go-gitea/gitea/assets/2114189/b188035e-f691-428b-8b2d-ff7b2199b2f9)


![image](https://github.com/go-gitea/gitea/assets/2114189/132e9745-1c3b-4e00-9e0d-15eaea495dee)

</details>

## TODO

* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)

---------

Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-21 22:35:11 +00:00
Yarden Shoham
f5ce2ed292
Allow all URL schemes in Markdown links by default (#24805)
- Closes #21146
- Closes #16721

## ⚠️ BREAKING ⚠️
This changes the default behavior to now create links for any URL scheme
when the user uses the markdown form for links (`[label](URL)`), this
doesn't affect the rendering of inline links. To opt-out set the
`markdown.CUSTOM_URL_SCHEMES` setting to a list of allowed schemes, all
other schemes (except `http` and `https`) won't be allowed.

# Before

![image](https://github.com/go-gitea/gitea/assets/20454870/35fa18ce-7dda-4995-b5b3-3f360f38296d)

# After

![image](https://github.com/go-gitea/gitea/assets/20454870/0922216b-0b35-4b77-9919-21a5c21dd5d0)

---------

Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-19 17:17:07 +02:00
Patrick Schratz
3db3d5d181
Document redis-cluster explicitly in config (#24717)
Co-authored-by: delvh <dev.lh@web.de>
2023-05-15 13:45:48 +08:00
KN4CK3R
5968c63a11
Add Go package registry (#24687)
Fixes #7608

This PR adds a Go package registry usable with the Go proxy protocol.

![grafik](https://github.com/go-gitea/gitea/assets/1666336/328feb5c-3df2-4f9d-8eae-fe3126d14c37)
2023-05-14 23:38:40 +08:00
wxiaoguang
82224c54e0
Improve avatar uploading / resizing / compressing, remove Fomantic card module (#24653)
Fixes: #8972
Fixes: #24263

And I think it also (partially) fix #24263 (no need to convert) ,
because users could upload any supported image format if it isn't larger
than AVATAR_MAX_ORIGIN_SIZE


The main idea: 

* if the uploaded file size is not larger than AVATAR_MAX_ORIGIN_SIZE,
use the origin
* if the resized size is larger than the origin, use the origin

Screenshots:

JPG:

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/70e98bb0-ecb9-4c4e-a89f-4a37d4e37f8e)

</details>

APNG:

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/9055135b-5e2d-4152-bd72-596fcb7c6671)


![image](https://github.com/go-gitea/gitea/assets/2114189/50364caf-f7f6-4241-a289-e485fe4cd582)

</details>

WebP (animated)

<details>


![image](https://github.com/go-gitea/gitea/assets/2114189/f642eb85-498a-49a5-86bf-0a7b04089ae0)

</details>

The only exception: if a WebP image is larger than MaxOriginSize and it
is animated, then current `webp` package can't decode it, so only in
this case it isn't supported. IMO no need to support such case: why a
user would upload a 1MB animated webp as avatar? crazy .....

---------

Co-authored-by: silverwind <me@silverwind.io>
2023-05-13 20:59:11 +02:00
KN4CK3R
9173e079ae
Add Alpine package registry (#23714)
This PR adds an Alpine package registry. You can follow [this
tutorial](https://wiki.alpinelinux.org/wiki/Creating_an_Alpine_package)
to build a *.apk package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/227779595-b76163aa-eea1-4a79-9583-775c24ad74e8.png)

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-12 17:27:50 +00:00
rune
4b80813341
Support SSH for go get (#24664)
fix #12192 Support SSH for go get

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
2023-05-12 09:44:37 +00:00
wxiaoguang
54f399c4df
Increase default LFS auth timeout from 20m to 24h (#24628)
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.

I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.

## ⚠️ BREAKING

If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
2023-05-10 22:23:47 +08:00
wxiaoguang
6f9c278559
Rewrite queue (#24505)
# ⚠️ Breaking

Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).

If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.

Example:

```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```

Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.

# The problem

The old queue package has some legacy problems:

* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.

It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.

# The new queue package

It keeps using old config and concept as much as possible.

* It only contains two major kinds of concepts:
    * The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.

There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.

Almost ready for review.

TODO:

* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)

## Code coverage:

![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
2023-05-08 19:49:59 +08:00
KN4CK3R
05209f0d1d
Add RPM registry (#23380)
Fixes #20751

This PR adds a RPM package registry. You can follow [this
tutorial](https://opensource.com/article/18/9/how-build-rpm-packages) to
build a *.rpm package for testing.

This functionality is similar to the Debian registry (#22854) and
therefore shares some methods. I marked this PR as blocked because it
should be merged after #22854.


![grafik](https://user-images.githubusercontent.com/1666336/223806549-d8784fd9-9d79-46a2-9ae2-f038594f636a.png)
2023-05-05 20:33:37 +00:00
KN4CK3R
bf999e4069
Add Debian package registry (#24426)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry.
You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing.
Source packages are not supported at the moment and I did not find
documentation of the architecture "all" and how these packages should be
treated.


![grafik](https://user-images.githubusercontent.com/1666336/218126879-eb80a866-775c-4c8e-8529-5797203a64e6.png)

Part of #20751.

Revised copy of #22854.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Giteabot <teabot@gitea.io>
2023-05-02 12:31:35 -04:00
Yarden Shoham
cc84c58aff
Remove unused setting time.FORMAT (#24430)
It's loaded and then never used.

---------

Co-authored-by: Giteabot <teabot@gitea.io>
2023-04-29 22:51:43 +02:00
Yarden Shoham
c0ddec8a2a
Revert "Add Debian package registry" (#24412)
Reverts go-gitea/gitea#22854
2023-04-28 18:06:41 -04:00
KN4CK3R
bf77e2163b
Add Debian package registry (#22854)
Co-authored-by: @awkwardbunny

This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.

---------

Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-04-28 17:51:36 -04:00
contra-bit
58caf422e6
Add .livemd as a markdown extension (#22730)
## Needs and benefits
[Livebook](https://livebook.dev/) notebooks are used for code
documentation and for deep dives and note-taking in the elixir
ecosystem. Rendering these in these as Markdown on frogejo has many
benefits, since livemd is a subset of markdown. Some of the benefits
are:
- New users of elixir and livebook are scared by unformated .livemd
files, but are shown what they expect
- Sharing a notebook is as easy as sharing a link, no need to install
the software in order to see the results.

[goldmark-meraid ](https://github.com/abhinav/goldmark-mermaid) is a
mermaid-js parser already included in gitea. This makes the .livemd
rendering integration feature complete. With this PR class diagrams, ER
Diagrams, flow charts and much more will be rendered perfectly.

With the additional functionality gitea will be an ideal tool for
sharing resources with fellow software engineers working in the elixir
ecosystem. Allowing the git forge to be used without needing to install
any software.

## Feature Description
This issue requests the .livemd extension to be added as a Markdown
language extension.

- `.livemd` is the extension of Livebook which is an Elixir version of
Jupyter Notebook.
- `.livemd` is` a subset of Markdown.

This would require the .livemd to be recognized as a markdown file. The
Goldmark the markdown parser should handle the parsing and rendering
automatically.

Here is the corresponding commit for GitHub linguist:
https://github.com/github/linguist/pull/5672

Here is a sample page of a livemd file:

https://github.com/github/linguist/blob/master/samples/Markdown/livebook.livemd

## Screenshots

The first screenshot shows how github shows the sample .livemd in the
browser.
The second screenshot shows how mermaid js, renders my development
notebook and its corresponding ER Diagram. The source code can be found
here:
79615f7428/termiNotes.livemd

## Testing
I just changed the file extension from `.livemd`to `.md`and the document
already renders perfectly on codeberg. Check you can it out
[here](https://codeberg.org/lgh/Termi/src/branch/livemd2md/termiNotes.md)

---------

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2023-04-26 11:22:54 -04:00
silverwind
517f9f5aa4
Don't set meta theme-color by default (#24340)
Fixes https://github.com/go-gitea/gitea/issues/24321. By not setting
this meta tag, Safari will use body color for chrome and out-of-viewport
areas, which looks much better then static mismatching green.

As per
[MDN](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/meta/name/theme-color)
it's really only Apple browsers who still support this tag, most others
have dropped support.
2023-04-26 00:56:42 -04:00
wxiaoguang
d44e1565da
Refactor setting.Other and remove unused SHOW_FOOTER_BRANDING (#24270)
The `SHOW_FOOTER_BRANDING` came from year 2015, and it seems nobody ever
uses it. It only shows an GitHub icon which seems unrelated to Gitea, it
doesn't do what document says. So, remove it.

## ⚠️ Breaking

Users can now remove the key `[other].SHOW_FOOTER_BRANDING` from their
app.ini.
2023-04-22 19:38:25 -04:00
Gary Moon
29194a9dd6
Correct the access log format (#24085)
The default access log format has been unnecessarily escaped, leading to
spurious backslashes appearing in log lines.

Additionally, the `RemoteAddr` field includes the port, which breaks
most log parsers attempting to process it. I've added a call to
`net.SplitHostPort()` attempting to isolate the address alone, with a
fallback to the original address if it errs.

Signed-off-by: Gary Moon <gary@garymoon.net>
2023-04-13 21:14:06 +08:00
Leon Busch-George
7a8a4f5432
Prefer native parser for SSH public key parsing (#23798)
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.

This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.

Fixes #23363

EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:

## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.

There was something else but I can't remember at the moment.

EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
2023-04-11 14:34:28 +08:00
Jason Song
977ef215fa
Rename actions unit to repo.actions and add docs for it (#23733)
I neglected that the `NameKey` of `Unit` is not only for translation,
but also configuration. So it should be `repo.actions` to maintain
consistency.

## ⚠️ BREAKING ⚠️

If users already use `actions.actions` in `DISABLED_REPO_UNITS` or
`DEFAULT_REPO_UNITS`, it will be treated as an invalid unit key.
2023-04-03 00:05:37 -04:00
wxiaoguang
e57e1144c5
Add ONLY_SHOW_RELEVANT_REPOS back, fix explore page bug, make code more strict (#23766)
Follow #21962

After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.

This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.

And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.

I think this PR needs to be backported.
2023-03-29 08:41:45 -05:00
techknowlogick
92c160d8e7
Add meilisearch support (#23136)
Add meilisearch support

Fixes #20665
2023-03-28 22:23:23 -04:00
wxiaoguang
5727056ea1
Make minio package support legacy MD5 checksum (#23768)
A feedback from discord:
https://discord.com/channels/322538954119184384/561007778139734027/1090185427115319386

Some storages like:

 * https://developers.cloudflare.com/r2/api/s3/api/
 * https://www.backblaze.com/b2/docs/s3_compatible_api.html

They do not support "x-amz-checksum-algorithm" header

But minio recently uses that header with CRC32C by default. So we have
to tell minio to use legacy MD5 checksum.

I guess this needs to be backported because IIRC we 1.19 and 1.20 are
using similar minio package.


The minio package code for SendContentMD5 looks like this:

<details>

<img width="755" alt="image"
src="https://user-images.githubusercontent.com/2114189/228186768-4f2f6f67-62b9-4aee-9251-5af714ad9674.png">

</details>
2023-03-28 11:10:24 -04:00
Brecht Van Lommel
84daddc2fa
Editor preview support for external renderers (#23333)
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.

Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.

Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.

## ⚠️ BREAKING ⚠️

The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.

---------

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-03-24 14:12:23 +08:00
silverwind
af3711100a
Add .patch to attachment.ALLOWED_TYPES (#23580) 2023-03-19 15:58:43 -04:00
Jordan Cech
69c9ab387f
Update app.example.ini (#23480) 2023-03-14 20:39:36 -04:00
KN4CK3R
c709fa17a7
Add Swift package registry (#22404)
This PR adds a [Swift](https://www.swift.org/) package registry.


![grafik](https://user-images.githubusercontent.com/1666336/211842523-07521cbd-8fb6-400f-820c-ee8048b05ae8.png)
2023-03-13 15:28:39 -05:00
Philip Peterson
757b4c17e9
Support reflogs (#22451)
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.

Implements #14865

---------

Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-03-13 15:51:07 +08:00
sillyguodong
5155ec35c5
Parse external request id from request headers, and print it in access log (#22906)
Close: #22890.

---
### Configure in .ini file:
```ini
[log]
REQUEST_ID_HEADERS = X-Request-ID, X-Trace-Id
```

### Params in Request Header
```
X-Trace-ID: trace-id-1q2w3e4r
```

![image](https://user-images.githubusercontent.com/33891828/218665296-8fd19a0f-ada6-4236-8bdb-f99201c703e8.png)



### Log output:

![image](https://user-images.githubusercontent.com/33891828/218665225-cc242a57-4ffc-449a-a1f6-f45ded0ead60.png)
2023-03-10 09:54:32 -06:00
Yarden Shoham
0e7bec1849
Add InsecureSkipVerify to Minio Client for Storage (#23166)
Allows using Minio with untrusted certificates

Closes #23128

Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
2023-02-27 16:26:13 +00:00
KN4CK3R
d987ac6bf1
Add Chef package registry (#22554)
This PR implements a [Chef registry](https://chef.io/) to manage
cookbooks. This package type was a bit complicated because Chef uses RSA
signed requests as authentication with the registry.


![grafik](https://user-images.githubusercontent.com/1666336/213747995-46819fd8-c3d6-45a2-afd4-a4c3c8505a4a.png)


![grafik](https://user-images.githubusercontent.com/1666336/213748145-d01c9e81-d4dd-41e3-a3cc-8241862c3166.png)

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-06 09:49:21 +08:00
KN4CK3R
df789d962b
Add Cargo package registry (#21888)
This PR implements a [Cargo registry](https://doc.rust-lang.org/cargo/)
to manage Rust packages. This package type was a little bit more
complicated because Cargo needs an additional Git repository to store
its package index.

Screenshots:

![grafik](https://user-images.githubusercontent.com/1666336/203102004-08d812ac-c066-4969-9bda-2fed818554eb.png)

![grafik](https://user-images.githubusercontent.com/1666336/203102141-d9970f14-dca6-4174-b17a-50ba1bd79087.png)

![grafik](https://user-images.githubusercontent.com/1666336/203102244-dc05743b-78b6-4d97-998e-ef76341a978f.png)

---------

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-05 18:12:31 +08:00
ByLCY
7baeb9c52a
Add new captcha: cloudflare turnstile (#22369)
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile

Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
2023-02-05 15:29:03 +08:00
delvh
4d20a4a1ba
Remove ONLY_SHOW_RELEVANT_REPOS setting (#21962)
Every user can already disable the filter manually, so the explicit
setting is absolutely useless and only complicates the logic.

Previously, there was also unexpected behavior when multiple query
parameters were present.

---------

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-02-04 21:26:38 +08:00
techknowlogick
2741546bed
Repositories: by default disable all units except code and pulls on forks (#22541)
Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.

A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.

Also add missing `repo.packages` unit to documentation.

code by: @brechtvl

## ⚠️ BREAKING ⚠️ 

When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.

Co-authored-by: Brecht Van Lommel <brecht@blender.org>
2023-02-04 14:48:38 +08:00
KN4CK3R
6ba9ff7b48
Add Conda package registry (#22262)
This PR adds a [Conda](https://conda.io/) package registry.
2023-02-01 12:30:39 -06:00
Jason Song
4011821c94
Implement actions (#21937)
Close #13539.

Co-authored by: @lunny @appleboy @fuxiaohei and others.

Related projects:
- https://gitea.com/gitea/actions-proto-def
- https://gitea.com/gitea/actions-proto-go
- https://gitea.com/gitea/act
- https://gitea.com/gitea/act_runner

### Summary

The target of this PR is to bring a basic implementation of "Actions",
an internal CI/CD system of Gitea. That means even though it has been
merged, the state of the feature is **EXPERIMENTAL**, and please note
that:

- It is disabled by default;
- It shouldn't be used in a production environment currently;
- It shouldn't be used in a public Gitea instance currently;
- Breaking changes may be made before it's stable.

**Please comment on #13539 if you have any different product design
ideas**, all decisions reached there will be adopted here. But in this
PR, we don't talk about **naming, feature-creep or alternatives**.

### ⚠️ Breaking

`gitea-actions` will become a reserved user name. If a user with the
name already exists in the database, it is recommended to rename it.

### Some important reviews

- What is `DEFAULT_ACTIONS_URL` in `app.ini` for?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954
- Why the api for runners is not under the normal `/api/v1` prefix?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592
- Why DBFS?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178
- Why ignore events triggered by `gitea-actions` bot?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103
- Why there's no permission control for actions?
  - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868

### What it looks like

<details>

#### Manage runners

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png">

#### List runs

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png">


#### View logs

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png">



</details>

### How to try it

<details>

#### 1. Start Gitea

Clone this branch and [install from
source](https://docs.gitea.io/en-us/install-from-source).

Add additional configurations in `app.ini` to enable Actions:

```ini
[actions]
ENABLED = true
```

Start it.

If all is well, you'll see the management page of runners:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png">


#### 2. Start runner

Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow
the
[README](https://gitea.com/gitea/act_runner/src/branch/main/README.md)
to start it.

If all is well, you'll see a new runner has been added:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png">

#### 3. Enable actions for a repo

Create a new repo or open an existing one, check the `Actions` checkbox
in settings and submit.

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png">
<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png">

If all is well, you'll see a new tab "Actions":

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png">

#### 4. Upload workflow files

Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can
follow the [quickstart](https://docs.github.com/en/actions/quickstart)
of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions
in most cases, you can use the same demo:

```yaml
name: GitHub Actions Demo
run-name: ${{ github.actor }} is testing out GitHub Actions 🚀
on: [push]
jobs:
  Explore-GitHub-Actions:
    runs-on: ubuntu-latest
    steps:
      - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event."
      - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!"
      - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}."
      - name: Check out repository code
        uses: actions/checkout@v3
      - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner."
      - run: echo "🖥️ The workflow is now ready to test your code on the runner."
      - name: List files in the repository
        run: |
          ls ${{ github.workspace }}
      - run: echo "🍏 This job's status is ${{ job.status }}."
```

If all is well, you'll see a new run in `Actions` tab:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png">

#### 5. Check the logs of jobs

Click a run and you'll see the logs:

<img width="1792" alt="image"
src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png">

#### 6. Go on

You can try more examples in [the
documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions)
of GitHub Actions, then you might find a lot of bugs.

Come on, PRs are welcome.

</details>

See also: [Feature Preview: Gitea
Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/)

---------

Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: ChristopherHX <christopher.homberger@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 09:45:19 +08:00
tiny6996
29b78bce33
Fix incorrect Redis URL snippets in the example app.ini (#22573)
Fixes #22571

Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
2023-01-23 02:17:15 +00:00
zeripath
2cc3a6381c
Add cron method to gc LFS MetaObjects (#22385)
This PR adds a task to the cron service to allow garbage collection of
LFS meta objects. As repositories may have a large number of
LFSMetaObjects, an updated column is added to this table and it is used
to perform a generational GC to attempt to reduce the amount of work.
(There may need to be a bit more work here but this is probably enough
for the moment.)

Fix #7045

Signed-off-by: Andrew Thornton <art27@cantab.net>
2023-01-16 13:50:53 -06:00
KN4CK3R
fc037b4b82
Add support for incoming emails (#22056)
closes #13585
fixes #9067
fixes #2386
ref #6226
ref #6219
fixes #745

This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.

Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed

A possible signature and/or reply gets stripped from the content.

I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2023-01-14 23:57:10 +08:00
Xinyu Zhou
7cc7db73b9
Add option to prohibit fork if user reached maximum limit of repositories (#21848)
If user has reached the maximum limit of repositories:

- Before
  - disallow create
  - allow fork without limit
- This patch:
  - disallow create
  - disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit

fixed https://github.com/go-gitea/gitea/issues/21847

Signed-off-by: Xinyu Zhou <i@sourcehut.net>
2022-12-27 15:21:14 -06:00
zeripath
d6b96627c1
Add setting to disable the git apply step in test patch (#22130)
For a long time Gitea has tested PR patches using a git apply --check
method, and in fact prior to the introduction of a read-tree assisted
three-way merge in #18004, this was the only way of checking patches.

Since #18004, the git apply --check method has been a fallback method,
only used when the read-tree three-way merge method has detected a
conflict. The read-tree assisted three-way merge method is much faster
and less resource intensive method of detecting conflicts. #18004 kept
the git apply method around because it was thought possible that this
fallback might be able to rectify conflicts that the read-tree three-way
merge detected. I am not certain if this could ever be the case.

Given the uncertainty here and the now relative stability of the
read-tree method - this PR makes using this fallback optional and
disables it by default. The hope is that users will not notice any
significant difference in conflict detection and we will be able to
remove the git apply fallback in future, and/or improve the read-tree
three-way merge method to catch any conflicts that git apply method
might have been able to fix.

An additional benefit is that patch checking should be significantly
less resource intensive and much quicker.

(See
https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737)

Ref #22083

Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
2022-12-19 19:37:15 +08:00
Lunny Xiao
c9ef03af65
Fix wrong default value for update checker on app.example.ini (#22084) 2022-12-11 16:08:01 -06:00
Jason Song
0a85537c79
Support disabling database auto migration (#22053)
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
2022-12-07 09:58:31 -06:00
luzpaz
fdfd77f478
Fix typos (#21979)
Found via codespell
2022-11-29 18:41:29 -06:00
zeripath
f6fd501841
Correct the fallbacks for mailer configuration (#21945)
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.

This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.

Ref #21744

Signed-off-by: Andrew Thornton <art27@cantab.net>
2022-11-27 10:08:40 +00:00
Xinyu Zhou
68e934ab5d
Add option to enable CAPTCHA validation for login (#21638)
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.

Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code 

Partially resolved #6049 

Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
2022-11-22 21:13:18 +00:00
Xinyu Zhou
b4802b9b2e
Allow disable RSS/Atom feed (#21622)
This patch provide a mechanism to disable RSS/Atom feed.

Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
2022-11-21 13:14:58 +08:00
Drew Noel
2cbea23d70
Add configuration for CORS allowed headers (#21747)
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.

Fixes #21746

Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2022-11-11 14:39:27 +08:00
zeripath
99688ef994
Attempt clarify AppWorkPath etc. (#21656)
Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.

Fix #21523

Signed-off-by: Andrew Thornton <art27@cantab.net>

Signed-off-by: Andrew Thornton <art27@cantab.net>
2022-11-09 20:22:31 -05:00
KN4CK3R
20674dd05d
Add package registry quota limits (#21584)
Related #20471

This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.

Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2022-11-09 14:34:27 +08:00
Xinyu Zhou
100448a007
Allow disable sitemap (#21617)
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).

Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
2022-10-28 11:17:38 -04:00
rock2dust
abd59cd5cd
Update comment about repository.DISABLED_REPO_UNITS in app.example.ini (#21343)
Add allowed values: `repo.projects`
2022-10-05 20:38:30 +01:00
Clar Fon
3d10193be2
Allow specifying SECRET_KEY_URI, similar to INTERNAL_TOKEN_URI (#19663)
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5

Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2022-10-02 01:26:33 +08:00
delvh
0c51595eed
Clarify that ENABLE_SWAGGER only influences the API docs, not the routes (#21215)
Previously, the docs seemed to suggest that you can disable the API
completely by setting `ENABLE_SWAGGER=false`.
This is not the case.
2022-09-20 00:48:48 +02:00
zeripath
88c2e24360
Add KaTeX rendering to Markdown. (#20571)
This PR adds mathematical rendering with KaTeX.

The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.

The second step to make this extension only run if math support is
enabled.

The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.

Fix #3445

Signed-off-by: Andrew Thornton <art27@cantab.net>

Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2022-09-14 00:33:37 +08:00
Gusted
27ac65a124
Only show relevant repositories on explore page (#19361)
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.

Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
2022-08-25 20:38:41 +02:00
zeripath
943753f560
Support Proxy protocol (#12527)
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.

Fix #7508

Signed-off-by: Andrew Thornton <art27@cantab.net>
2022-08-21 19:20:43 +01:00
Will Norris
82f89ff996
auth/reverseproxy: Add support for full name (#20776)
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.

Tested locally with caddy serving as reverse proxy with Tailscale
authentication.

Signed-off-by: Will Norris <will@tailscale.com>

Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2022-08-16 14:30:27 +08:00
wxiaoguang
3d76d6034e
Update docs for versions (#20750) 2022-08-10 13:37:15 -04:00
Gusted
58de07e5fd
Add support mCaptcha as captcha provider (#20458)
https://mcaptcha.org/

Co-authored-by: Felipe Leopoldo Sologuren Gutiérrez <fsologureng@users.noreply.github.com>
2022-08-10 15:20:10 +02:00
Norwin
279e4e235c
Increase default item listing size ISSUE_PAGING_NUM to 20 (#20547)
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
2022-08-06 18:43:40 +08:00