Commit graph

15 commits

Author SHA1 Message Date
oliverpool
3f9f6f1350 fix: hook post-receive for sha256 repos
(cherry picked from commit 5e73c67d67)
2024-05-15 21:08:15 +00:00
Earl Warren
50822f361e
Do not update PRs based on events that happened before they existed
* Split TestPullRequest out of AddTestPullRequestTask
* A Created field is added to the Issue table
* The Created field is set to the time (with nano resolution) on creation
* Record the nano time repo_module.PushUpdateOptions is created by the hook
* The decision to update a pull request created before a commit was
  pushed is based on the time (with nano resolution) the git hook
  was run and the Created field

It ensures the following happens:

* commit C is pushed
* the git hook queues AddTestPullRequestTask for processing and returns with success
* TestPullRequest is not called yet
* a pull request P with commit C as the head is created
* TestPullRequest runs and ignores P because it was created after the commit was received

When the "created" column is NULL, no verification is done, pull
requests that were created before the column was created in the
database cannot be newer than the latest call to a git hook.

Fixes: https://codeberg.org/forgejo/forgejo/issues/2009
(cherry picked from commit 998a431747)

Conflicts:
	models/forgejo_migrations/migrate.go
	see https://codeberg.org/forgejo/forgejo/pulls/3165#issuecomment-1755941
	services/pull/pull.go
	trivial conflicts
2024-04-12 10:41:19 +02:00
Lunny Xiao
4eb2a29910
Improve ObjectFormat interface (#28496)
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.

```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```

Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.

Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.

@AdamMajer Please review.
2023-12-19 07:20:47 +00:00
Adam Majer
cbf923e87b
Abstract hash function usage (#28138)
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.

This forms the "no-op" part of the SHA256 enablement patch.
2023-12-13 21:02:00 +00:00
Lunny Xiao
f9cfd6ce5b
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634)
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.

Fix #15367
Replaces #23070 
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.

We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.

Some answer from ChatGPT as ref.

> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
> 
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
> 
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
> 
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
> 
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.

---------

Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 01:04:48 +00:00
Brecht Van Lommel
8bdc0acf97
Fix pull request update showing too many commits with multiple branches (#22856)
When the base repository contains multiple branches with the same
commits as the base branch, pull requests can show a long list of
commits already in the base branch as having been added.

What this is supposed to do is exclude commits already in the base
branch. But the mechansim to do so assumed a commit only exists in a
single branch. Now use `git rev-list A B --not branchName` instead of
filtering commits afterwards.

The logic to detect if there was a force push also was wrong for
multiple branches. If the old commit existed in any branch in the base
repository it would assume there was no force push. Instead check if the
old commit is an ancestor of the new commit.
2023-03-09 12:14:22 -06:00
flynnnnnnnnnn
e81ccc406b
Implement FSFE REUSE for golang files (#21840)
Change all license headers to comply with REUSE specification.

Fix #16132

Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2022-11-27 18:20:29 +00:00
wxiaoguang
dcd9fc7ee8
Refactor git command arguments and make all arguments to be safe to be used (#21535)
Follow #21464

Make all git command arguments strictly safe. Most changes are one-to-one replacing, keep all existing logic.
2022-10-23 22:44:45 +08:00
wxiaoguang
124b072f0b
Remove git.Command.Run and git.Command.RunInDir* (#19280)
Follows #19266, #8553, Close #18553, now there are only three `Run..(&RunOpts{})` functions.
 * before: `stdout, err := RunInDir(path)`
 * now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
2022-04-01 10:55:30 +08:00
6543
3043eb36bf
Delete old git.NewCommand() and use it as git.NewCommandContext() (#18552) 2022-02-06 20:01:47 +01:00
zeripath
5cb0c9aa0d
Propagate context and ensure git commands run in request context (#17868)
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.

This now means that the if there is a git repo already open in the context it will be used instead of reopening it.

Signed-off-by: Andrew Thornton <art27@cantab.net>
2022-01-19 23:26:57 +00:00
Lunny Xiao
719bddcd76
Move repository model into models/repo (#17933)
* Some refactors related repository model

* Move more methods out of repository

* Move repository into models/repo

* Fix test

* Fix test

* some improvements

* Remove unnecessary function
2021-12-10 09:27:50 +08:00
Gusted
4e7ca946da
Use *PushUpdateOptions as receiver (#17724) 2021-11-24 04:08:13 -05:00
Lunny Xiao
a420beda2a
Fix a bug on refactoring (#13373) 2020-10-31 23:42:54 +08:00
Lunny Xiao
4df2ed29f2
Refactor: Move PushUpdateOptions (#13363)
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
2020-10-30 22:59:02 +01:00